Non-combustible A1
Does not burn or support combustion. The highest fire class for facades.

Ultra-thin stone veneer that replicates travertine, brick, concrete and wood — and weighs 20× less. We supply wholesale: samples, dealer pricing and project volumes for villas, hotels and contractors across Indonesia.
Wholesale flexible ceramic, flexible stone and architectural surfaces — made for Indonesian weather, supplied by the sheet, the pallet or the project.
Flexible ceramic is a thin sheet material made of natural stone powder and a modified mineral binder. Only 3–5 mm thick, yet the surface is indistinguishable from travertine, sandstone, brick or wood. With the rainy season now setting in across Bali, it is the facade cladding that stays unaffected: the factory hydrophobic layer keeps panels from absorbing water, cracking or growing mould. The material is also known as MCM (modified clay material), flexi stone or soft stone.
A material that combines the realism of natural stone with the ease of modern cladding.
Does not burn or support combustion. The highest fire class for facades.
Mineral composition, no resins or harmful emissions. Safe for living spaces.
Factory hydrophobic treatment. Rain-safe, mould-free, fit for wet zones.
Cast from real stone: pores, veins, relief. Truly hard to tell from natural.
Colour does not fade in the sun. Stable tone on the facade for years.
4–7 kg/m². No load on the structure, lower install and logistics cost.
Bends to a radius, cut with a knife. Wraps columns and arches seamlessly.
Glues to any substrate. No wet works, no heavy sub-structure.
Developers, contractors, architects and shops: request the wholesale catalogue, get physical samples, and plan deliveries anywhere in Indonesia — from Bali and Jakarta to Medan and Bandung.

From flagship flexible stone to translucent concrete and jade glass. Hover a card to see the material in a finished project.

Stone powder and mineral binder cast into a 3–5 mm sheet. A1 non-combustible, 15–20 year service life, sizes up to 1200 × 3000 mm. Seven texture series — from travertine to wild stone and clay.
Light stoneBold relief of rock and wild stone in lightweight polyurethane. From 1.2 kg, glue-on, 15 colours.
Rattan · BambooOpenwork rattan and bamboo weaves, light-diffusing patterns for partitions and joinery fronts.
Handmade“Shimmer” and “Interstellar” series: glaze painted by light and the artisan's hand. 3D mosaic for murals.
CobogoOpenwork blocks for partitions, screens and ventilated facades. Light and shadow, privacy without solid walls.
BacklitOptical fibre cast into concrete: stone by day, a starlit glow through the wall when backlit.
Jade GlassTranslucent jade- and onyx-look panels. Counters, reception desks and boutique facades with dramatic backlighting.
Also in the collection: WPC carbon panels and grooved cement panels for engineering and commercial solutions.
Real surface samples from the catalogue — from travertine and wild stone to wood, metal and fabric.
Clay · Rammed earth
Fluted travertine
Wood grain
Marble
Metal
Fabric
Wild stone
Grey stone
White rock
Jade glass
Rattan weave
Mosaic
Warm beige limestone with natural pores. Left — the macro surface and the thin 3 mm flexible edge; right — the same material on a villa facade at golden hour.

The layered texture of rammed earth in warm ochre tones. Close-up — and the same material as a feature wall in a boutique-hotel lobby.

A warm oak grain — but with the fire rating of stone and none of the upkeep of timber. Wraps curved walls with no joints.
Villa and commercial facades, interiors, hotels and restaurants. Tap an image to enlarge.
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢Ventilated and glue-on cladding, imitating stone, brick or wood with no load on the structure.
Boutiques, restaurants, showrooms. Fast install and A1 fire class for public buildings.
Living rooms, bedrooms, headboards, TV zones. Stone and wood where the natural is too heavy.
A bend radius from 20 mm — complex forms are finished with no joints or cutting.
Reception, bar fronts, murals and partitions. Striking textures with backlighting.
Bathrooms, spas, pools. Water resistance and mould protection with no loss of texture.
Supply and installation support in Bali and Indonesia's major cities. Choose your area for local details.

Flexible stone veneer & facade panels in Bali.

Flexible stone veneer & facade panels in Canggu.

Flexible stone veneer & facade panels in Seminyak.

Flexible stone veneer & facade panels in Ubud.

Flexible stone veneer & facade panels in Uluwatu.

Flexible stone veneer & facade panels in Denpasar.

Flexible stone veneer & facade panels in Jakarta.

Flexible stone veneer & facade panels in Medan.

Flexible stone veneer & facade panels in Bandung.
Flexible ceramic is produced at one of Foshan's largest sites (China) — a 20,000 m² centre of ceramic material science, built inside a converted 1960s factory.
Over a decade of expertise in architectural ceramics and material selection for designers worldwide. We supply these materials across Indonesia and handle selection, logistics and installation support.

Flexible ceramic is a thin sheet material of natural stone powder and a modified mineral binder. It is 3–5 mm thick, 15–20× lighter than natural stone, and its surface is indistinguishable from travertine, brick, concrete or wood. It bends, cuts with a knife and glues to almost any substrate.
Yes. It is factory hydrophobic-treated, UV-, frost- and rain-resistant, Class A1 non-combustible and rated for a 15–20 year service life — ideal for villa and commercial facades, including curved surfaces.
It glues to almost any flat or curved base: concrete, brick, plaster, drywall, plywood, OSB, autoclaved concrete. No heavy sub-frame and no wet works required.
Flexible ceramic is 15–20× lighter and 5–8× thinner than natural stone and porcelain, it bends, cuts with a knife and installs with adhesive — while looking and feeling like the natural material.
We'll send texture samples, match a collection to your project and quote the cost including installation.
WhatsApp